Halotron Fire Extinguisher

Halotron fire extinguisher
How does Halotron fire extinguisher work?

Halotron fire extinguisher designed for streaming applications on the handheld and portable. This is the world’s most distributed based halocarbon clean agent extinguishing. Halotron fire extinguisher are ideal for handling fires in the setting of the company and the industry. They inhibit chemical reaction fire but does not leave solid residues each when used. It preventing damage to sensitive electronic documents such as computers, monitors, electrical controller.

Halotron fire extinguisher class

Halotron fire extinguisher has approved under the environment of the United States SNAP program. Also, it has undergone extensive testing of all halogenated agent fire extinguishers. There are many separate listings for the portable Halotron fire extinguisher.

Halotron fire extinguisher first introduced to replace the use of Halon-1211. Which found to have the nature of ozone. In the Montreal Protocol in 1987 restrictions on the use of Halon-1211 due to the perceived environmental damage. Although Halon has continued to use in the Middle East, and Asia.

There are many substitutes for Halon fire extinguishers today like Halotron I, Halotron II, FE-36, and FM-200. These agents issued in the form of gas evaporating the liquid, and also has traces of not dense. Halocarbon based alternatives have no ozone depleting properties, and their lives lower atmosphere. It used where specified Halon and used before, even though they may not be effective.

Halotron fire extinguisher use

Halotron I is a chemical mixture which based on the raw material of HCFC-123. Also, it has high long throws compared to net other agents, due to its high boiling point. As a comparison, it is more effective and easier to throw away even for inexperienced users, as it could reach about 45feet.

Also, unlike the traditional dry chemical agents such as mono-ammonium phosphate (ABC Dry Chemical) or potassium bicarbonate (purple K). Which can be corrosive, Halotron fire extinguisher who left no residue after application. Also, consequently cause without collateral damage to the equipment around the fire.

To replace Halon 1301 is Halotron II, which is a total of three flood-agent component based on HFC-134a. These agents, but, the discharge in the form of gas.

One other thing that also discharges in the form of gas is FM-200. The perceived main advantage to this is that gas can reach all areas of the facility covered. Also, allows for the minimal interruption in the Office environment. Also, an alternative to Halon 1301 fire extinguishers, pose this type of no breathing problems for affected. It does not block vision, allowing people to get the safety in case of fire emergency. This type would need periodic servicing and maintenance. Monitoring is usually done by an experienced technician.