Steps to Use a Fire Extinguisher

27 views
steps to use a fire extinguisher
Easy steps to use a fire extinguisher

All the required fire extinguishers have to provided with some basic steps to use a fire extinguisher already on them. Before you even think to put out the fire with portable devices. However, there are some things that require some attention. If you are the person responsible for your workplace. Then, you will have the responsibility under the law to guarantee that all workers qualified in what to do in case of fire.

The importance of the basic steps to use a fire extinguisher

Depending on your position, your team may or may not be needed to operate the fire extinguisher. But this is something that should be defined in the emergency plan and clearly delivered to all personnel. In the United States, it is the sequence of the Fire Safety that put these tasks on the employer and called the responsible person. If your team expected to use the portable fire extinguishers to tackle a fire. Then, you need to make sure that they have trained and competent for the steps to use a fire extinguisher.

If you and your workers confronted with fire, some simple guidelines that will help you decide whether you should attempt to use fire extinguishers or not. This is a critical factor to keep in mind for your team safety.

If the fire was already large you do not have to be trying to fight it. Always check your escape route. Don’t fight the fire if you do not have a clear way out and don’t let the fire spread and prevent you from getting to the way out.

If the area already full of smoke from a fire, do not strive to extinguish the fire. This is too dangerous because of the fumes highly toxic and can defeat you. Try to avoid being left on your own to fight the fire. Have someone with you if you can, because this could be important if you get into trouble.

The steps to use a fire extinguisher:

You do not have to use the fire extinguisher if you have any difficulties about steps for using a fire extinguisher. This is because all extinguishers designed for certain classes of fire and some will just get out safely with fire extinguishers specialist. A good example of how this could be seriously wrong if you use water extinguishers for electrical appliances. This could result in electric shock and very serious outcomes.

The General steps to use a fire extinguisher that relies on the same principle. And there is a way in common use to remember the basic steps. The abbreviation is ‘ PASS ‘, which stands to pull, aim, squeeze and sweep. Different kinds of fire require different fire extinguishers and slightly different methods. But PASS is a good method that will work for the most popular firework. In general kind of workplace environment, these instructions really applicable to water, foam, carbon dioxide, and powder fire extinguishers.

Steps to use a fire extinguisher: PASS

PULL the pin from a fire extinguisher
AIMING the hose, nozzle, etc. on the basis of firework about eight feet away.
SQUEEZE the nozzle to enable fire extinguisher service and removing the contents.
SWEEP hose from side to side on the basis of firework.

This is only the steps that are very basic to use fire extinguishers. Also, if the necessary personnel to operate the fire extinguishers. They must get proper training and allowed to actually use the fire as part of their exercise. This is the only way to guarantee that they will have the courage and knowledge to take the proper step in emergencies.